The HP 6034A system power supply is an HP-IB programmable unit that provides laboratory-grade performance with high efficiency of switching regulation techniques. Autoranging allows the supply to provide at least 200 watts output power over a wide range of output voltage and current combinations without the user having to select the proper output range. Output voltage and current are continuously indicated on individual meters. LED indicators show the complete operating state of the unit. Front panel controls let the user set output voltage, current, and the overvoltage protection trip level. Overvoltage protection protects the load by quickly and automatically interrupting energy transfer if a preset trip voltage is exceeded. The 6034A can be both a listener and a talker on the HP-IB. Output voltage and current can be sent directly to the 6034A in volts and amps. Upon command the 6034A will measure its output voltage or current and place the value on the HP-IB. Output connections are made to rear panel screw-on terminals. Either the positive or negative output terminal may be grounded, or the output may be floated up to ±240 Vdc from chassis ground. Output voltage can be locally or remotely sensed, and the 6034A can be operated in multiple-supply combinations for increased output voltage or current capability. DC output Voltage: 0 to 60 V Current: 0 to 10 A Ripple and noise Voltage: 3 mVrms, 30 mVp-p Current: 5 mArms Load transient recovery time: <1 ms Functions that can be controlled by HP-IB Output voltage, current Output power circuits off and on Soft voltage, current limits Limit mode (CV or CC) Time delay after output trigger or reset before requesting service for limit mode or overrange Service request masks Trigger to implement latest mode, output voltage and current, and OVP trip level Trigger for output voltage or current measurement Programming resolution: Voltage 15 mV, current 2.5 mA Programming accuracy Constant voltage: ±0.07% ±28 mV Constant current: ±0.085% ±12.5 mA Output impedance (typical): 0.1 m© at dc, <1 © for all frequencies below 1 MHz Front panel meters Output voltage low range: ±20 V Output voltage high range: ±200 V Resolution low range: 10 mV Resolution high range: 100 mV Accuracy low range: ±20 mV ±0.07% Accuracy high range: ±200 mV ±0.09% OVP setting: Range 200 V, resolution 100 mV Output current range: ±19.99 A Output current resolution: 10 mA Output current accuracy: ±17 mA ±0.1%
attributename1 | |
---|---|
attributevalue1 | |
attributeinvariations1 | |
attributeisvisible1 | |
attributeistaxonomy1 | |
attributename2 | |
attributevalue2 | |
attributeinvariations2 | |
attributeisvisible2 | |
attributeistaxonomy2 | |
attributename3 | |
attributevalue3 | |
attributeinvariations3 | |
attributeisvisible3 | |
attributeistaxonomy3 | |
attributename4 | |
attributevalue4 | |
attributeinvariations4 | |
attributeisvisible4 | |
attributeistaxonomy4 | |
attributenamebandwidth | |
attributeisvisiblebandwidth | |
attributeistaxonomybandwidth | |
attributenamechannels | |
attributeinvariationschannels | |
attributeisvisiblechannels | |
attributeistaxonomychannels | |
attributenamecolor | |
attributeinvariationscolor | |
attributeisvisiblecolor | |
attributeistaxonomycolor | |
attributenamemaxmemorydepth | |
attributenameseriesproducts | |
attributenamesize | |
attributeinvariationssize | |
attributeisvisiblesize | |
attributeistaxonomysize |
Related products
Refurbished Power Supplies
Refurbished Power Supplies
Refurbished Power Supplies
Refurbished Power Supplies
Refurbished Power Supplies
Refurbished Power Supplies
Refurbished Power Supplies
Refurbished Power Supplies